NC Import for Rhino 1.0

	Rating: 5/5 (1 votes)	Platforms:	Homepage: http://www.fpsols.com
	Type: Commercial	Releases: Apr 01, 2002
	Cost: $150.00US	Developer: Floating Point Solutions Private Limited
	NC Import for Rhino is a plug-in for Rhino. This plug-in gives Rhino the ability to import commands from NC files. NC Import for Rhino is very easy to use as it adds a new file type to the Rhino File Open dialog box. To import a NC file select Open from the File menu. Select "Numeric Control Files (*.nc,*.ncc)" from the "File of type" combo box and select a NC file to import. A new drawing will be created containing the imported NC file.

file size: 300k

Keywords: Nc import for rhino, import, NC, file, Numeric Control

---

---

NC Import for SolidWorks 1.0

	Rating: (not rated)	Platforms:	Homepage: http://www.fpsols.com
	Type: Commercial	Releases: Apr 01, 2002
	Cost: $200.00US	Developer: Floating Point Solutions Private Limited
	NC Import for SolidWorks is an add-in for SolidWorks. This add-in gives SolidWorks the ability to convert tool movements in NC commands to corresponding lines and arcs in a SolidWorks 3D sketch. NC Import for SolidWorks is very easy to use as it adds a new file type to the SolidWorks File Open dialog box. To import a NC file select a NC file from the "File->Open" dialog box.

file size: 300k

Keywords: file, Control, activex, CAM, dictionary

---

OBJ Export for AutoCAD 1.0

	Rating: (not rated)	Platforms:	Homepage: http://www.fpsols.com
	Type: Commercial	Releases: Apr 01, 2002
	Cost: $200.00US	Developer: Floating Point Solutions Private Limited
	OBJ Export for AutoCAD is a plug-in for AutoCAD 2000, 2000i, 2002 and 2004. This plug-in gives AutoCAD the ability to export geometric data from AutoCAD to Alias|Wavefront OBJ files. OBJ Export for AutoCAD is very easy to use. It adds a new command to AutoCAD called "OBJOUT". Simply type "OBJOUT" at the AutoCAD command prompt and select the entities to export.

file size: 400k

Keywords: Add-in, import, Alias|Wavefront, add-in, Wavefront

---

OBJ Export for SolidWorks 1.0

	Rating: 4/5 (1 votes)	Platforms:	Homepage: http://www.fpsols.com
	Type: Commercial	Releases: Apr 01, 2002
	Cost: $200.00US	Developer: Floating Point Solutions Private Limited
	OBJ Export for SolidWorks is a plug-in for SolidWorks. This plug-in gives SolidWorks the ability to export graphical data to ASCII Alias|Wavefront OBJ files. OBJ Export for SolidWorks is very easy to use as it adds a new file type to the SolidWorks File Save As dialog box. To export an OBJ file select an OBJ file from the "File->Save As" dialog box.

file size: 300k

Keywords: add-in, OBJ Export, alias, Export, organizer

---

OBJ Import for AutoCAD 1.0

	Rating: (not rated)	Platforms:	Homepage: http://www.fpsols.com
	Type: Commercial	Releases: Apr 01, 2002
	Cost: $200.00US	Developer: Floating Point Solutions Private Limited
	OBJ Import for AutoCAD is a plug-in for AutoCAD 2000, 2000i, 2002 and 2004. This plug-in gives AutoCAD the ability to import geometric data from ASCII Alias|Wavefront OBJ files. OBJ Import for AutoCAD is very easy to use. It adds a new command to AutoCAD called "OBJIN". Simply type "OBJIN" at the AutoCAD command prompt and select an OBJ file to import.

file size: 400k

Keywords: add-in, Alias|Wavefront, add-in, Wavefront, ectaco

---

OBJ Import for Rhino 1.0

	Rating: (not rated)	Platforms:	Homepage: http://www.fpsols.com
	Type: Commercial	Releases: Apr 01, 2002
	Cost: $150.00US	Developer: Floating Point Solutions Private Limited
	OBJ Import for Rhino is a plug-in for Rhino. This plug-in gives Rhino the ability to import graphical data from ASCII Alias|Wavefront OBJ files. OBJ Import for Rhino is very easy to use as it adds a new file type to the Rhino File Open dialog box. To import an OBJ file select Open from the File menu. Select "Wavefront Files (*.obj)" from the "File of type" combo box and select an OBJ file to import.

file size: 300k

Keywords: delete, plug-in, addin, Rhino, obj

---

OBJ Import for SolidWorks 1.0

	Rating: (not rated)	Platforms:	Homepage: http://www.fpsols.com
	Type: Commercial	Releases: Apr 01, 2002
	Cost: $200.00US	Developer: Floating Point Solutions Private Limited
	OBJ Import for SolidWorks is a plug-in for SolidWorks. This plug-in gives SolidWorks the ability to import graphical data from ASCII Alias|Wavefront OBJ files. OBJ Import for SolidWorks is very easy to use as it adds a new file type to the SolidWorks File Open dialog box. To import a OBJ file select an OBJ file from the "File->Open" dialog box.

file size: 300k

Keywords: OBJ, file, importer, add-in, open obj

---

PIX Import for AutoCAD 1.0

	Rating: (not rated)	Platforms:	Homepage: visit
	Type: Commercial	Releases: Apr 01, 2002
	Cost: $200.00US	Developer: Floating Point Solutions Private Limited
	PIX Import for AutoCAD is a plug-in for AutoCAD 2000, 2000i, 2002 and 2004. This plug-in gives AutoCAD the ability to import geometric data from PIX files. PIX Import for AutoCAD is very easy to use. It adds a new command to AutoCAD called "PIXIN". Simply type "PIXIN" at the AutoCAD command prompt and select a PIX file to import.

file size: 400k

Keywords: 3d, open, delete, pix import for autocad, file

---

PIX Import for Rhino 1.0

	Rating: (not rated)	Platforms:	Homepage: http://www.fpsols.com
	Type: Commercial	Releases: Apr 01, 2002
	Cost: $150.00US	Developer: Floating Point Solutions Private Limited
	PIX Import for Rhino is a plug-in for Rhino. This plug-in gives Rhino the ability to import graphical data from PIX files. PIX Import for Rhino is very easy to use as it adds a new file type to the Rhino File Open dialog box. To import a XYZ file select Open from the File menu. Select "Dr. Picza Files (*.pix)" from the "File of type" combo box and select a PIX file to import. A new drawing will be created containing the imported PIX file.

file size: 300k

Keywords: Dr, import, PIX Import, nature, Import

---

Point Cloud for AutoCAD 1.0

	Rating: (not rated)	Platforms:	Homepage: http://www.fpsols.com
	Type: Commercial	Releases: Apr 01, 2002
	Cost: $250.00US	Developer: Floating Point Solutions Private Limited
	Point Cloud for AutoCAD is a plug-in for AutoCAD 2000, 2000i, 2002 and 2004. This plug-in gives AutoCAD to ability to process point clouds. You can import a point cloud into AutoCAD as it is or fit a surface that passes through the points to recreate the original object. This is ideal for reverse engineering and GIS applications. There are different ways of fitting a surface depending on the nature of the point cloud.

file size: 800k

Keywords: backup, points, add-in, digitize, Code Generation