AutoProject for AutoCAD 1.0
|
Rating:
  4/5 (1 votes) |
Platforms:
 |
Homepage: http://www.fpsols.com | ||
| Type: Commercial | Releases: Apr 01, 2002 | ||||
| Cost: $100.00US | Developer: Floating Point Solutions Private Limited | ||||
|
AutoProject for AutoCAD is a plug-in for AutoCAD 2000, 2000i, 2002 and 2004. This plug-in gives AutoCAD the ability to project 3D entities to 2D entities in the XY plane in the AutoCAD model space. AutoProject for AutoCAD is very easy to use as it adds several commands to AutoCAD. You simply type a command at the AutoCAD command prompt, select the entities you wish to project and the job is done. |
|||||
file size: 400k
|
Keywords: Plug-in, free, utility, erd, plane |
DWG DXF Convert 1.0
|
Rating:
5/5 (1 votes) |
Platforms:
|
Homepage: http://www.fpsols.com | ||
| Type: Commercial | Releases: Apr 01, 2002 | ||||
| Cost: $30.00US | Developer: Floating Point Solutions Private Limited | ||||
| DWG DXF Convert is an AutoCAD DWG/DXF bi-directional translator. It converts an AutoCAD DWG file into an AutoCAD DXF file and vice-versa without the need of AutoCAD. DWG DXF Convert also supports batch conversions of multiple DWG or DXF files. | |||||
|
file size: 1800k
|
Keywords: Bi-directional, dictionary, translation, ectaco, import |
HPGL Export for Rhino 1.0
|
Rating:
(not rated) |
Platforms:
|
Homepage: http://www.fpsols.com | ||
| Type: Commercial | Releases: Apr 01, 2002 | ||||
| Cost: $150.00US | Developer: Floating Point Solutions Private Limited | ||||
|
HPGL Export for Rhino is a HPGL plot file export plug-in for Rhino. This plug-in gives Rhino the ability to export geometric data from Rhino to HPGL Plot (PLT) files. HPGL Export for Rhino is very easy to use as it adds a new file type to the Rhino File Save As dialog box. To export a PLT file select Save As from the File menu. Select "HPGL Plot Files (*.plt)" from the "File of type" combo box and select a PLT file to export to. |
|||||
|
file size: 300k
|
Keywords: Translation, ectaco, utility, add-in, HPGL Export |
HPGL Import for AutoCAD 1.0
|
Rating:
(not rated) |
Platforms:
|
Homepage: http://www.fpsols.com | ||
| Type: Commercial | Releases: Apr 01, 2002 | ||||
| Cost: $200.00US | Developer: Floating Point Solutions Private Limited | ||||
|
HPGL Import for AutoCAD is a plug-in for AutoCAD 2000, 2000i, 2002 and 2004. This plug-in gives AutoCAD the ability to import geometric data from HPGL Plot (PLT) files. HPGL Import for AutoCAD is very easy to use. It adds a new command to AutoCAD called "HPGLIN". Simply type "HPGLIN" at the AutoCAD command prompt and select a HPGL Plot (.plt) file to import. |
|||||
|
file size: 400k
|
Keywords: Hpgl import for autocad, add-in, HPGL, file, importing |
HPGL Import for Rhino 1.0
|
Rating:
(not rated) |
Platforms:
|
Homepage: http://www.fpsols.com | ||
| Type: Commercial | Releases: Apr 01, 2002 | ||||
| Cost: $150.00US | Developer: Floating Point Solutions Private Limited | ||||
|
HPGL Import for Rhino is a plug-in for Rhino. This plug-in gives Rhino the ability to import graphical data from HPGL Plot (PLT) files. HPGL Import for Rhino is very easy to use as it adds a new file type to the Rhino File Open dialog box. To import a PLT file select Open from the File menu. Select "HPGL Plot Files (*.plt)" from the "File of type" combo box and select a PLT file to import. |
|||||
|
file size: 300k
|
Keywords: file, file, file, plug-in, image |
HPGL Import for SolidWorks 1.0
|
Rating:
(not rated) |
Platforms:
|
Homepage: http://www.fpsols.com | ||
| Type: Commercial | Releases: Apr 01, 2002 | ||||
| Cost: $200.00US | Developer: Floating Point Solutions Private Limited | ||||
|
HPGL Import for SolidWorks is an add-in for SolidWorks. This add-in gives SolidWorks the ability to import graphical data from Hewlett Packard Graphic Language Plot files. HPGL Import for SolidWorks is very easy to use as it adds a new file type to the SolidWorks File Open dialog box. To import a PLT file select a PLT file from the "File->Open" dialog box. |
|||||
|
file size: 300k
|
Keywords: HPGL, plug-in, importing, import, open hpgl |
HPGL Import for Surfcam 1.0
|
Rating:
(not rated) |
Platforms:
|
Homepage: http://www.fpsols.com | ||
| Type: Commercial | Releases: Apr 01, 2002 | ||||
| Cost: $200.00US | Developer: Floating Point Solutions Private Limited | ||||
|
HPGL Import for Surfcam is a plug-in for Surfcam. This plug-in gives Surfcam the ability to import graphical data from HPGL Plot (PLT) files. HPGL Import for Surfcam is very easy to use as it adds a new file type to the Surfcam File Open dialog box. To import a PLT file select Open from the File menu. Select "HPGL Plot Files (*.plt)" from the "File of type" combo box and select a PLT file to import. |
|||||
|
file size: 300k
|
Keywords: translation, plug-in, effect, add-in, add-in |
IGES Import for AutoCAD 1.0
|
Rating:
 4.6/5 (5 votes) |
Platforms:
|
Homepage: http://www.fpsols.com | ||
| Type: Commercial | Releases: Apr 01, 2002 | ||||
| Cost: $200.00US | Developer: Floating Point Solutions Private Limited | ||||
|
IGES Import for AutoCAD is a plug-in for AutoCAD 2000, 2000i, 2002 and 2004. This plug-in gives AutoCAD the ability to import geometric data from ASCII IGES files. IGES Import for AutoCAD is very easy to use. It adds a new command to AutoCAD called "IGESIN". Simply type "IGESIN" at the AutoCAD command prompt and select an IGES file to import. |
|||||
|
file size: 400k
|
Keywords: Utility, IGESIN, IGSIN, add-in, IGES import |
Mesh To Solid for Rhino 1.0
|
Rating:
3/5 (1 votes) |
Platforms:
|
Homepage: http://www.fpsols.com | ||
| Type: Commercial | Releases: Apr 01, 2002 | ||||
| Cost: $250.00US | Developer: Floating Point Solutions Private Limited | ||||
|
Mesh To Solid for Rhino is a plug-in for Rhino 2.0 and 3.0. This plug-in gives Rhino to ability to convert a mesh into a solid. Mesh To Solid for Rhino is very easy to use. It adds a new command to Rhino called "MeshToSolid". Simply type "MeshToSolid" at the command prompt and select the mesh you wish to convert into a solid. |
|||||
|
file size: 1400k
|
Keywords: Convert, audio converter, polygon mesh, AutoCad, add-in |
MeshWorks for Rhino 1.0
|
Rating:
5/5 (1 votes) |
Platforms:
|
Homepage: http://www.fpsols.com | ||
| Type: Commercial | Releases: Apr 01, 2002 | ||||
| Cost: $500.00US | Developer: Floating Point Solutions Private Limited | ||||
|
MeshWorks for Rhino is a plug-in for Rhino. It adds a variety of mesh manipulation commands to Rhino. MeshWorks for Rhino adds a new menu to the existing Rhino menu containing all the added commands. Simply use this menu to manipulate meshes. |
|||||
|
file size: 2k
|
Keywords: arcade, decimate, health, face, MeshWorks |
Recent searches:
